Commit Graph
22 Commits
Author SHA1 Message Date
patternihaandClaude Opus 5.5 761d8032db TUN inbound: Log "unable to get the interface" for an ignored IPv6 interface error on Windows
Like the other IPv6 steps, so that an ignored missing IPv6 interface no
longer logs as a bare "Element not found."

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 07:11:54 +03:30
patternihaandClaude Opus 5.5 4296be5d05 TUN inbound: Only log IPv6 setup errors on Windows when DisabledComponents turns IPv6 off, with "misconfigtun" blocking IPv6 then
https://github.com/XTLS/Xray-core/pull/7341#issuecomment-6700092032

IPv6 entries are no longer left out. With IPv6 turned off by
DisabledComponents (0x10, the non-tunnel interfaces, the TUN among them,
as in 0xFF), IPv6 is set up as usual, and errors doing so, clearing its
DNS servers included, are only logged; otherwise they exit, also for a
config without IPv6 entries, which replaces the skips of #6874, #7325 and
#7332. "misconfigtun" then blocks IPv6 outside the TUN whatever the routes,
as IPv6 still works until the reboot that applies the value.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:08:06 +03:30
patternihaandClaude Opus 5.5 8fe26a91d5 TUN inbound: Ignore IPv6 entries on Windows when DisabledComponents turns IPv6 off on all interfaces
https://github.com/XTLS/Xray-core/pull/7332#issuecomment-6676374920

With IPv6 off on all interfaces by DisabledComponents (0x01 and 0x10 both
set, as in 0xFF), the IPv6 entries of gateway, dns and
autoSystemRoutingTable are ignored and the TUN starts with IPv4 only, so
one config works either way. The value takes effect at the next boot only,
so ignored IPv6 routes add "[::/0]:misconfigtun" to autoSystemWfpBlockLeak:
until the reboot, IPv6 the TUN would have taken cannot leave outside it,
also through interfaces connected later.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 23:53:26 +03:30
36756ad672 TUN inbound: IPv6 entries in dns exit the core on Windows when IPv6 cannot be set up, as in gateway and autoSystemRoutingTable (#7332)
https://github.com/XTLS/Xray-core/pull/7325#issuecomment-6637932641
https://github.com/XTLS/Xray-core/pull/7332#issuecomment-6643930058
https://github.com/XTLS/Xray-core/pull/7332#issuecomment-6676374920

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 03:53:19 +00:00
ad98ffd42b TUN inbound: Ignore dns IPv6 setup error when neither gateway nor autoSystemRoutingTable has an IPv6 entry on Windows (#7325)
https://github.com/XTLS/Xray-core/pull/7325#issuecomment-6619158295

---------

Co-authored-by: patterniha <71074308+patterniha@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 10:20:31 +00:00
967ade1e03 TUN inbound's autoSystemWfpBlockLeak: Add "all", "allexceptlan", port alone, port range, "tcp"/"udp" alone or with port range, "icmp", and a CIDR in front of any value; Always allow loopback, DHCP and IPv6 neighbor discovery (#7315)
https://github.com/XTLS/Xray-core/pull/7288#issuecomment-6559954865
https://github.com/XTLS/Xray-core/pull/7315#issuecomment-6582481840
https://github.com/XTLS/Xray-core/pull/7315#issuecomment-6588253141

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 21:40:36 +00:00
6cdd323ad8 TUN inbound's autoSystemWfpBlockLeak: Support "tcp/port" and "udp/port"; "dns" covers "tcp/853" and "udp/853" as well (#7288)
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-6492838227
https://github.com/XTLS/Xray-core/pull/7288#issuecomment-6507229727
https://github.com/XTLS/Xray-core/pull/7288#issuecomment-6516762634

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 13:16:31 +00:00
3071fbfa25 Sockopt: Handle single-family interface binding on Windows, including TUN inbound's autoOutboundsInterface (#7214)
And https://github.com/XTLS/Xray-core/pull/7214#issuecomment-6329118637

https://github.com/XTLS/Xray-core/pull/7201#issuecomment-6314453444

Fixes https://github.com/XTLS/Xray-core/issues/7160#issuecomment-6246944012

---------

Co-authored-by: patterniha <71074308+patterniha@users.noreply.github.com>
2026-10-28 10:15:58 +00:00
Artem LytkinandRPRX 70ef97d564 TUN inbound: Use Xray-core's built-in lightweight TCP/IP stack instead of gVisor (#7130)
https://github.com/XTLS/Xray-core/pull/6771#issuecomment-5752154561
https://github.com/XTLS/Xray-core/pull/6795#issuecomment-6095740152
https://github.com/XTLS/Xray-core/pull/7130#issuecomment-6116258188
2026-10-12 02:18:56 +00:00
8989adfd3f TUN inbound: Handle weak host send and forwarding on the outbound interface on Windows (#7092)
https://github.com/XTLS/Xray-core/issues/6776#issuecomment-5994046421
https://github.com/XTLS/Xray-core/issues/6776#issuecomment-5994796106

Closes https://github.com/XTLS/Xray-core/issues/6776
Closes https://github.com/XTLS/Xray-core/issues/6872

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-08 05:49:28 +00:00
nSQUICKandGitHub 1e08d48d88 TUN inbound: Start on Windows when IPv6 is disabled system-wide (#6874)
https://github.com/XTLS/Xray-core/pull/6874#issuecomment-5989986544
2026-10-05 07:26:00 +00:00
1f304916bd TUN inbound: Add autoSystemWfpBlockLeak on Windows (blocks "dns" and "misconfigtun" IPv4/IPv6 traffic leaks outside the TUN); Rename autoSystemDNS to autoSystemDnsToGateway on Linux (and change some behaviors) (#6853)
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-5899791359
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-5901287980
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-5903680113
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-5904123488
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-5904647772
https://github.com/XTLS/Xray-core/pull/6853#issuecomment-5905047424

Fixes https://github.com/XTLS/Xray-core/issues/6454#issuecomment-5863800676

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 06:26:16 +00:00
Artem LytkinandGitHub 5dda894e29 TUN inbound: Reuse existing Wintun adapter by name on Windows again (#6811)
Fixes https://github.com/XTLS/Xray-core/issues/6780
2026-09-27 20:39:17 +00:00
LjhAUMEMandGitHub c7245c0336 TUN inbound: Refine Windows support (#6478)
https://github.com/XTLS/Xray-core/pull/6478#issuecomment-5489052152
2026-09-08 02:51:35 +00:00
Jasper344612andGitHub 1d8eb81d70 TUN inbound: Add desc config for Windows ("Wintun" by default) (#6486)
https://github.com/XTLS/Xray-docs-next/pull/872#issuecomment-4936055488
2026-07-17 22:21:33 +00:00
Jasper344612andGitHub 241aa38ac0 TUN inbound: Support autoSystemRoutingTable and autoOutboundsInterface on macOS and Linux as well (#6366)
https://github.com/XTLS/Xray-core/pull/6366#issuecomment-4788510365
2026-06-24 11:06:00 +00:00
LjhAUMEMandGitHub 52cf9ef5d6 TUN inbound: Better "autoOutboundsInterface": "auto" (#6035)
https://github.com/XTLS/Xray-core/pull/6035#issuecomment-4336755860

Fixes https://github.com/XTLS/Xray-core/issues/6030
2026-05-02 12:18:25 +00:00
6780045550 TUN inbound: Add FreeBSD support (#5891)
And reverts "refactor `mtu` to support setting IPv4/v6 separately" https://github.com/XTLS/Xray-core/pull/5891#issuecomment-4245677624

And fixes `autoOutboundsInterface` on Windows https://github.com/XTLS/Xray-core/pull/5887#issuecomment-4251719900

---------

Co-authored-by: LjhAUMEM <llnu14702@gmail.com>
2026-04-15 12:40:19 +00:00
LjhAUMEMandGitHub 806b8dc27d TUN inbound: Add gateway, dns, autoSystemRoutingTable, autoOutboundsInterface for Windows (#5887)
And refactor `mtu` to support setting IPv4/v6 separately

Example: https://github.com/XTLS/Xray-core/pull/5887#issue-4198837696
2026-04-13 13:38:10 +00:00
风扇滑翔翼andGitHub 85f1234863 TUN inbound: Generate deterministic GUID on Windows (#5811)
Closes https://github.com/XTLS/Xray-core/issues/5810
2026-03-19 10:18:07 +00:00
OwersunandGitHub 5173e5c15d TUN inbound: Enhance Darwin interface support (#5598)
* Proxy: TUN: Enhance Darwin interface support.
- reduce number of actions done to create/configure the interface in the system
- assign synthetic static link-local ipv4/ipv6 addresses to the interface, that are required by the OS for the routing to work
- make tun_darwin_endpoint be implemented significantly more similar to tun_windows_enpoint, preparing them for potential unification

* Proxy: TUN: Unify Darwin/Windows endpoint, which are now extremely similar, into one GVisorEndpoint.
Making darwin/windows tun implement GVisorDevice with simple readpacket/writepacket methods that GVisorEndpoint untilise
2026-01-25 18:19:05 +00:00
39ba1f7952 Proxy: Add TUN inbound for Windows & Linux, including Android (#5464)
* Proxy: Implement tun raw network interface inbound support for Linux

* Proxy: Tun. Include "android" as build condition for build of tun_default implementation

* Proxy: Tun. Add .Close() cleanup calls to Handler.Init() where needed

* Proxy: Add Tun for Android

* Proxy: Tun. Implement Windows support

---------

Co-authored-by: yuhan6665 <1588741+yuhan6665@users.noreply.github.com>
2026-01-07 22:05:08 +00:00